Questions? Feedback? powered by Olark live chat software
  Loading... Please wait...

Light 36 Gauge Copper Sheets
for Bar Tops, Countertops, Tables, Furniture & more!

Mottled Patina Copper Sheet - Light 36 Gauge

  • Mottled Patina Copper Sheet - Light 36 Gauge
  • Mottled Color Copper
  • Mottled Color Copper
Price:
$97.99


Product Description

Primarily black with rich browns and golden coppery areas coming through. Truly and luxuriously beautiful.

Authentic, Naturally Aged Copper Sheets, Exotic Beauty. Our Copper is "REAL" and not painted or stained! It amazes us each time we see sheets of pure, lustrous, machined copper transformed. Magic!

Thickness Each patina copper sheet is .005" thick (36 gauge). A color copper patina sheet is very durable; it will not tear by hand, but can easily be cut with scissors or a new utility knife. If you take a foot-long sheet of aluminum foil and fold it five times, you will have an idea of how thick a copper sheet is.
Size Our Mottled Patina Copper Sheet - Light 36 Gauge comes in a standard 3 foot width and has varying lengths up to 16 feet.
Weight One 3' x 4' copper sheet has a weight of almost 3 lbs.
Adhering Color copper is easy to adhere to almost any surface using normal contact cement.
Surface
Protection
A one-time coat of lacquer is recommended to protect the copper for many years. We recommend purchasing our semi-gloss COPPERLAC lacquer. COPPERLAC is an air-dry lacquer, engineered to provide highly durable interior and exterior protection on color copper. For the highest level of protection for bar tops and countertops, we recommend a lacquer coating, followed by a self-leveling epoxy coating.
Examples View examples of our color copper sheets in use.
Sample Pack We offer a sample pack of our copper complete with all 20 copper colors.
Copper
Comparison
View our copper sheet comparison chart to find out which gauge copper you need for your project.

 

*New Copper Bar Top & Countertop Tutorial*

- Our new Video Tutorial will show you how to:

  • Make a copper bartop without a Bar Rail or a raised edge .
  • How to easily cut and fold the corner on all 4 sides.
  • How to pour the epoxy and pop air bubbles. Materials used (most can be purchased in our Tools & Supplies section:
  • DAP/Original Formula Contact Cement
  • Small Fiskars scissors (sold in craft stores)
  • Laminate Roller
  • COPPERLAC lacquer
  • Commercial Epoxy
  • Heat Gun or Plumbers torch (both sold at Lowes and Home Depot for $20 (Please note that our copper sheet was lacquered before filming the video so you want to make sure you lacquer the copper sheet either before or after adhering it).

 


Copper Bar Top Tutorial 2

- Creating a Copper Bar Top with a bar rail using our Light 36 Gauge Copper with a lacquer base coat followed by a self-leveling epoxy coating.

Materials used (most can be purchased in our Tools & Supplies section:

  • Contact Cement
  • Paint Brush
  • Fiskars scissors (or a new utility knife)
  • Laminate Roller
  • COPPERLAC lacquer
  • Commercial Epoxy
  • Dowel Rods
  • Heat Gun.

 


Epoxy Tutorial Video

- This video shows you how to measure and mix the epoxy the correct way.

 


Cutting Light 36 Gauge Copper With A Utility Knife.

Using a new blade, a utility knife easily cuts through a 36 gauge copper sheet.

 


Cutting & Adhering Light 36 Gauge Copper to Wood Surface for a Kitchen Cabinet Door Insert.

Materials used:

  • Contact Cement
  • Small Sponge Roller
  • Fiskars Scissors (or a new utility knife)
  • Laminate Roller

 


Find Similar Products by Category


Write your own product review

Product Reviews

Showing reviews 1-6 of 7 | Next

  • Awesome Product

    Posted by Karlie B.

    Purchased to replace a couple glass panels in our new Dining Table. Followed the video and directions and the product looks awesome. We have received tons of compliments and everyone thought we purchased it this way.


  • Excellent

    Posted by John Parker

    Excellent product. Excellent instructions.

    One problem. During shipping the bottom lip of the roll was damaged. I had to trim aoubt 3 inches off the majority of the roll. Thank you.


  • Amazing product !

    Posted by Frank

    We were suppose to go with a granite top for the bar and i stumbled upon the TV show "Bar Rescue" ...couldn't resist to try that and WOW !!! What an amazing product and finish did we ever ended up with. It was not an easy task to do to cut and install the full 3 sheets of 3X10 and the 5 gallons of epoxy in order to achieve the expected finish but with patience and lots of careful handling, we pulled out one of the best bar i ever seen in the region and what a finish :) "Spectacular product"


  • Great!!

    Posted by Unknown

    Beautiful, Just what I wanted . I love it.


  • Unique & Different

    Posted by Kevin

    The copper answer for our bar and counter top was exactly the unique and different look we were going for. It came out better than we could have hoped, and everyone comments on how beautiful it is."


  • Blown away!

    Posted by Cory Sanderson

    I bought the Mottled Copper because it fit my theme the best, and once I unrolled it, I was impressed at first glance at the way it looked. It was very easy to work it, the instructions online/included were simple to follow, and the YouTube videos online were extremely helpful After the copper was installed on the bartop, and I had sprayed the copper with lacquer, I was TRULY blown away by the transformation and final color; it looked absolutely amazing. I had questions regarding the epoxy, and it was simple, contacting the staff at Color Copper to get help on the installation. Hands down this product MADE the bar, it is the focal point of discussion, not to mention the best looking part.


Showing reviews 1-6 of 7 | Next


Search
Watch Videos
Photo Gallery