The following products are used for making a bar top or countertop.

-1 Rubber J-Roller 1-1/2" diameter x 3" - Used for rolling copper sheets to the substrate.

-2 Five Quart Graduated Containers - Graduated plastic tubs are used for measuring and mixing epoxy accurately.
It is recommended that you use a new container for each gallon of epoxy mixed in order to avoid contamination. For example: 5 combined gallons of epoxy would require 5 containers.
You can purchase additional containers here.

-1 One Quart Graduated Container

-1 Husky Gallon Mixer Drill Bit - Mixes the epoxy to ensure a proper blend. Much easier than stirring by hand. A must have tool.

-1 Plastic Squeeges/Spreaders - For moving epoxy along surface of bar or countertop.

-2  Pair of Disposable Latex Gloves - Should be used when handling copper to avoid fingerprints.

-2  Poly Pro Mixing Sticks -  For hand mixing of epoxy. Molded pass oval holes insure fast complete mixing of epoxy.