Questions? Feedback? powered by Olark live chat software
  Loading... Please wait...
Sample Copper SwatchesGet Yours Today!

Bar and Table Top Epoxy COMMERCIAL GRADE

  • Bar and Table Top Epoxy COMMERCIAL GRADE
Your Price:
$79.95 (You save $20.00)

Product Description

Bar Top & Tabletop Epoxy for Restaurants and Homes (COMMERCIAL GRADE)

*Email from a recent customer: I am a contractor and I did a bar top with your epoxy and it turned out great. We get many compliments as people just rave about how nice it looks. For the table tops I tried to save some money and went with an epoxy I purchased locally in a store. I had mixed results. It looks cool, but has many flaws because the epoxy has dimples, high and low spots that we couldn't get out. I wish I would have used your epoxy for the table tops because it is a much higher quality product. I'll send in some photos of the bar top shortly.

David - Orlando, Florida

This product is a 100% solid, two component, clear polymer coating that is mixed at a 1 to 1 ratio by volume. Each kit contains a bottle of resin and a bottle of hardener. The product cures to a clear, high build, glass like finish that resists scratching, yellowing and will not distort with age. Items coated with it will become permanently preserved and protected for your enjoyment throughout a lifetime. This product will not exhibit blushing or sweat out under high humidity conditions.

We recommend that a lacquer seal coat be applied to the copper surface using CopperLac. The seal coat is brushed or sprayed on in a thin layer to seal the surface of the copper in order for the epoxy to adhere well to it. If you are not using our copper, and your surface is going to be wood only, you will not use lacquer; instead, paint on a thin seal coat of epoxy first to seal any pores in the wood surface and help prevent air bubbles from forming in the epoxy coat.

Working Conditions
For best results the product should be used at temperatures from 75-85 degrees F. The room which you are working should be clean, dry, dust and insect free.

Exterior Applications
Please not that although this product will resist yellowing better than other epoxies it is NOT 100% UV resistant. Continuous outdoor UV exposure over months or years will cause the finish to lose its gloss and cause gradual changes in color.

See the coverage charts shown below to calculate the amount you will need for your area. Remember not to combine seal and flood coat coverage's. Flood coats are designed to go on approximately 1/8" thick, which is about three times thicker than that of a seal coat.

Working Temperature of Product:
The working room temperature must be above 75 degrees, several hours prior to mixing the epoxy. We recommend that the product be brought inside and acclimated to room temperature, as it will be cold during winter shipping months. Use space heaters if necessary to ensure the temperature remains above 75 degrees in cold areas, such as garages and basements. It is extremely important that the temperature remain above 75 degrees for a full 72 hours, in order for the epoxy to cure. High or low humidity and higher temperatures (75-110 degrees) are perfectly fine for curing; the epoxy cures much faster with higher temperatures.

Epoxy Over Copper
We recommend that you wait 24 hours after adhering copper to your surface before pouring the epoxy over it. This gives the contact cement time to cure.

Copper Bar Kit

*Please Note: 1 Gallon Combined = 1/2 Gallon Resin + 1/2 Gallon Hardener

**Pouring over the Sides and Edges of a table, counter, or bar top
Make sure you purchase extra material to account for spillage over the sides.

***These calculations are not intended to give more than a rough estimate. Precise epoxy needs will vary according to many factors, including application type and project specific details. For specific advice regarding your project, you should engage the services of our customer service department at Customer Care.

epoxy coverage chart


Find Similar Products by Category

Write your own product review

Product Reviews

Showing reviews 1-6 of 32 | Next


    Posted by TRACY MURPHY

    Much prettier in person than in the photo... couldn't be happier with our purchase. Customer service was great and packaging of the product was outstanding. Thank you!

  • Watch the videos, amazing!

    Posted by Francesco G

    First time trying this and the guy helping us was able to pour a 28 foot counter top, just by watching videos. He wrote down every detail and had notepad in his pocket. Used stopwatch. It looks amazing.

  • Looks and Works Great!!!

    Posted by Gerhard Mora

    I covered my copper bar top with this epoxy and it worked just as promised. Be sure to follow the directions included with the material. It really is not difficult to apply this material if you are careful to not trap air bubbles during the mixing. I used a heat gun to pop any small bubbles that appeared and maintained a constant room temperature >75 degrees. The epoxy cured hard and clear!! I am very happy with the result and would recommend this product without any reservation.

  • read, watch, and follow your instinct

    Posted by Brandon

    I think the product is probably very good. I had less than desirable result the first time, after watching the videos, reading thru the instructions multiple times, and following every step to a "T". I've used epoxy before in a different context, and had no problems mixing small batches. Mixing a gallon at a time, especially for my square footage, seemed excessive. However, I had emailed before and it was suggested I purchase 2 gallons. I "mixed" 1 gallon, ended up only using 2 qts., wasted 2 qts., and in the end, being that it was not mixed well, wasted all of it. I have yet to get the surface suitable to retry the pour. It was certainly operator mixing error, and knowing what I know now, I would consider doing smaller batches and listening to my instincts as to when it's fully mixed.

  • Simply Amazing

    Posted by Gary

    It"s idiot proof if you follow the directions!
    36"x34" copper table top was trimmed in wood.
    Epoxy was poured over everything resulting in a very high end look. This small project used one gallon, barely finishing it. I highly recommend getting more than enough! Running out before completely coating would be a disaster!

  • Vanity Top

    Posted by Dennis

    Just followed instructions carefully. (Had stopwatch going for every step.) I thought there were no bubbles in it until I waved the torch over the wet epoxy. It went from clear to super clear!

Showing reviews 1-6 of 32 | Next

Watch Videos
Photo Gallery